Fish seem like the easiest pets to keep, don’t they? Well, this is true but only under the condition that you take very good care of the fish and keep their tank nice and clean.
Aquarium pumps have a filtration system with which they keep the water moving, and they do so to increase the liveliness of the ecosystem underwater.
Be very conscious of the purchase though. Changing these pumps is a huge discomfort, so make sure that you get the best aquarium pump you can find at one go so that you don’t have to go through the hassle of getting a new one after some days.
In a Rush? – Check Our Top 5 Picks of Best Aquarium Pumps
|Homasy 80 GPH||4.2|
|EcoPlus 396 GPH||4.2|
|Uniclife Aquarium Air Pump||4.4|
How Does an Aquarium Pump Work
Circulation is key to the survival of any living thing. It is very important to keep the water breathable for any aquatic being to survive. An aquarium pump does exactly this. It keeps the water moving by making use of a filtration system that keeps the toxic stuff out.
It creates a constant state of movement, in which the water from the bottom always comes pulled up to the surface, and in this way, it releases carbon dioxide into the air while taking more oxygen back in. The filtration mechanism gets a vibration going through the tubes, which are connected to the inlets and outlets.
A siphon brings the water into the filter, and then the drag force pushes the water back up again to complete the cycle. These filtration systems also catch all the debris and absorb all the chemical wastes while the circulation is going on.
The water inside the tank never remains stagnant, and these aquatic animals a very healthy ecosystem to thrive in.
6 Best Aquarium Pumps
If you want to see a blooming aquatic ecosystem inside your aquarium, then getting an aquarium pump is a must! But you will have to pay attention to what kind of pump you are buying, and whether it will suit your aquarium. Here we talk about some of the good ones you can find in stores now. Take a look!
Homasy 80 GPH
One of the worst things about getting an aquarium pump is that sometimes you don’t know the ruckus they are going to make, you get it set up, and it creates an unbearable buzzing the entire time. Fortunately, this pump that we are talking about here will give you no such post-purchase anxiety – it’s a soundless device!
Do not mistake that for lack of power of the pump. You will be quite astonished by the fact that this motor can raise the water column to a height of about 2.6 feet! This is the maximum steady capacity of the lift height, which makes this motor very ideal for small to medium-sized aquariums.
You will be able to adjust the flow rate of the water by using the very convenient adjustable knob. The flow rate to achieve here would be about 80 GPH when the settings are turned up to the maximum. Cleaning the pump is also made easy by the easy separation of the detachable construction!
- Being very small in size, the motor does not obstruct the look of the aquarium
- You can use suction cups to keep the motor mounted
- Has two nozzles to support the varying rates of flow
- Very easy to clean and maintain
EcoPlus 396 GPH
This pump right here comes with a fixed flow rate. You will not be able to turn the knobs and adjust settings in order to suit the demands. In other words, if you are looking for something that doesn’t require a lot of attention for maintenance, then this is your buddy!
These pumps are designed to be used from a range of different water systems, starting from fountains to big hydroponic systems! There are threaded fittings inside the pump, which keeps the knots and bolts sealed tight. Inside the device, there is a very powerful rare earth rotor magnet!
The pump has a motor of 36 watts, which can push out about 396 gallons of water every hour! And that, too, without the need to be oiled or maintained. It comes with a voltage cord of 120V and will include both inlet and outlet fitting systems. You can also rely on this machine to last you a long time.
The lasting guarantee is provided by the in-built strainer, which has been incorporated in order to save the impeller from damage.
- Pumps put large volumes of water by the hour
- Comes pre-wired and ready to be installed directly
- These are made to support hydroponic systems and big aquariums
- No hassle of turning the knobs to adjust to the right the water flow
This one will give you a pretty flow. It makes the water not only amazing for you to look at, but also for your fish to live in. We mean to say that this pump does not only pump the water, it also circulates and aerates it, giving it the effect of being a more lively underwater ecosystem.
The pump is completely submersible and usable in a range of different domestic water systems – spouts, fountains, aquariums, hydroponic systems; they have it all covered! It has a motor of 25 watts, that can elevate the water level to a maximum height of 6.9 feet.
One feature of this pump that makes it more suitable for a range of different water systems is that it has an adjustable water flow rate! Also, it comes with four suction cups and a power cord with a measure of about 5.9 feet. If you have never installed a pump in your aquarium before, you will still be able to put everything in place without hassle.
- All the fittings are threaded and properly sealed in place
- A flow of 400 GPH can be achieved when settings are turned up max
- Stainless steel impeller shaft will resist corrosion and last a long time
- Has an adjustable power know with which you can regulate the flow of water
Uniclife Aquarium Air Pump
This adjustable water pump will do the task for you regardless of whether you have a marine aquarium or a freshwater one. It can hold up about 100 gallons of water when settings are turned up high, but you will also be able to use it for small tanks of about 10 gallons of capacity by keeping the settings turned low.
One of the best things about this motor pump is that it is built to produce a good amount of air to flow in. This will keep things inside the aquarium even fresher and will give you long breaks between cleaning times. It is a quiet, powerful machine that does its job well.
It works on a volt range of 110 – 120 V and requires a power supply of about 4 watts. It has two exhaust systems and is compact enough to fit into the water system without drawing attention to itself.
- Comes with an adjustable air pump
- Very quiet, manageable and convenient to use
- All the required accessories are included in the package
- Has two different flow rates for big and small tanks separately
This is an upgraded version of a previous model, and therefore, it has been made to be very detailed in construction and management. The new version has been installed with all the new innovation of electronics of the current day, as a result of which, you will be able to get the utmost satisfaction of use from it.
If you are concerned about the energy consumption rates, as you should be, then this is the device you need to get! It has a 50% higher capacity to save energy without compromising its performance.
There is an electronic detection system that will turn off the power connection when the water flow is not necessary. It works on 30 watts and has a maximum flow of 1056 GPH. The maximum lift height that can be achieved by this device is 9.8 feet, which is suitable for medium-sized aquariums.
- Has a very smooth and quiet functionality
- Has a mechanism to protect the motor when it is off
- Will last for a long time due to the ceramic shaft and powerful motor
Hygger Quiet Mini
If you want your fish to not only survive but to thrive in the aquarium-like, it would result in a natural ecosystem; this small and quiet motor can help you achieve that goal. This pump was not designed like any other traditional pump. A special ceramic plate has been installed inside to keep the pump compact and effective.
The pump is very small, with just the necessary amount of power capacity for small to medium-sized aquariums that stay in the living room or bedroom. It only has a diameter of only about 2.4 inches, and a power consumption rate of 1.5 watts only.
Built with the environment in mind, expect to save a lot of money and valuable energy by using this device. It pumps out about 420 ml of water every minute and is ideal for systems that hold up to 15 gallons of water.
- It is a very quiet and compact device
- Pumps in a lot of air into the aquarium to keep the water fresh
- All the required accessories and attachments come in the package
What To Look For in an Aquarium Pump
Many aquarium pumps are in the market nowadays. It can be quite confusing to choose one from them. But if you understand what to look for in an aquarium pump, you’ll be able to get the bang for your buck. We’ll help you with the details. Keep reading.
Type of Filtration:
Filtration is one of the foremost duties of an aquarium pump. To understand whether the pump you are looking at is going to meet the filtration demands necessary to keep the filth out of the water in your aquarium, you have to first understand the different types of filtration systems.
To gloss over it, for now, you just have to know that there are two main types of filtration systems – water filtration and air filtration. Air filters do their job from being outside the water, whereas water filters stay submerged in water.
Size of the Water Pump:
Most of the motor pumps in the market will tell you what sizes of aquariums they are suitable for. However, our advice would be for you to choose a slightly bigger pump than you need. This will keep you covered in case the water pressure needs to be raised to in order to let in some extra air.
However, if you have a small aquarium, then try finding a compact device that can easily be hidden in some corner or behind some decoration inside the tank.
This is the most important thing that you have to figure out before you set your eyes on a motor pump. Since the aquarium stays mostly around people, you will have to find one that can do its job without making a ruckus!
When you go into to look at aquarium pumps, you will be surprised at how much the price of one differs from another! Some are priced only a few one digit dollars, while others go up to hundreds of dollars.
If you are looking for a pump to last you for many years, then you will find that all the suitable ones come at high price points! If you are pursuing this as a hobby, then smaller and cheaper options will be just as satisfactory.
How To Use an Aquarium Pump
Using an aquarium pump is no biggie at all. Your only work is to install the system into the tank and make sure that all the fittings are sealed tightly in place. In order to get the device working, you have to connect all the wires with the air tubing system in the pump.
Then you have to check for any of the valves to be loose. If they are, you have to tighten them properly! Finally, you have to connect the tubing to the entire circuitry, and then plug in the air pump to get the device started at its job.
How to Install an Aquarium Pump
Installation is really not as difficult as it seems. Just try to get a whole set of pump that has all the components inside it. After that, you will just have to follow some steps to get the work done.
First of all, you have to clean the aquarium and make sure that there is no debris remain inside the tank. After that, you have to fill up the tank with regular tap water, which is at room temperature. Then add in some interior decorations like fancy big pebbles, some plastic plants, or any other thing you want.
After this, add some more water into the tank. Now you add in the submersible heater and make sure that it is kept somewhere close to the main flow of water. There should a thermometer put into the water now – make sure that it is not too close to the heater itself.
When all of this is done, plug in the individual components of the motor pump one at a time. You will have the air pump itself, then the sump pump, the water filtration system, and the heater. Ensure that you have checked the outlets of air and its settings. This should be the last step if everything else were done properly.
To know whether you really have finished the task, test the sump pump to make sure the water flow has a steady flow and pressure. If everything is working nicely, then do the final step of adjusting the temperature. Wait 24 hours for the temperature settings to take fully take effect, and then check the water before putting in any living beings inside.
We have tried to cover all the frequently asked questions regarding the aquarium pump below. If you have any questions about anything relevant to aquarium pump reviews, please feel free to let us know!
Will the fish die if I don’t have an aquarium pump?
Well, no, it won’t. However, oxygen content in stagnant water is very low. As a result, your fish will become weak and unresponsive. Getting a pump for maintaining good circulation of air and water is highly recommended.
Will this have a significant effect on the electrical bill?
No, if you have an aquarium up to medium size, then it will have no noticeable effect. These air pumps will only need a power of about 5-7 watts!
Where should I keep the air pump?
It would be best if you keep the pump as close to the surface of the water as possible. This will save the pump from being affected in the case of a problem in the electrical units.
Do these water pumps have a heating system?
Yes, you will be able to use the temperature controls to make adjustments.
Do I need to wash all the pebbles and plastic plants before I put them into the tank?
Yes, you have to keep them squeaky clean so that they do not cause contamination of the water.
In order to get the best aquarium pump, you will need to learn about these pumps first. We hope our instructions were clear enough for you to understand and follow. Best of luck with the fish and the aquarium!